My Cart | Checkout

 
 
← Go Back

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP
New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP

Price: $197.99

Buy Now Add to Cart

Description:
The Ranger EX is a airplane is specially designed for Long Range FPV and quick and very easy trouble free Setup of this great big Bird. FPV Ranger EX offers few greater qualities that every FPV pilot looks forward to have in his / her RC FPV Plane.

- It has bigger tougher PVC Fuselage that makes this plane a crash resistant plane, Tons of open space to let bigger hands do their job inside the fuselage when it comes to mount the electronics inside and also this big place makes it possible for one to mount more gear inside and keep things neat.
- Ability to carry more payload means one can mount higher mAh batteries to get ultra long flight times needed for those long range FPV flights you are going to do
- Tall Landing gear and dragger wheel means you can now safely take off and land from ground. No need to hand launch a big heavy plane with all the gears and dangerous and sharp propeller spinning at the back
- Easy mounting of Various Brushless gimbals for GoPro 3 under the nose, now you can take ultimate stable flight videos of your long range flights
- Super easy few step setup and glue free assemble.
- Two pieces to carry only, Fuselage and Wings detach quick and easy for easy transportation and storage. Quick attachment on field for flight
- And not to forget the super awesome and powerful flight performance with long flight endurance this plane offers.


Specification:
Minimum Age Recommendation: 14 years
Experience Level: Beginners ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
Motor: 3715 powerful out runner brushless motor
ESC:Easy-Plug 40A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Propeller: 1060 Propeller
2.4Ghz 6-Channels(Not Included)
Receiver Not Included
11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Not Included)
Wingspan: 1980mm (77.9 in)
Overall Length: 1170mm (46 in)
Flying Weight(without battery): 1500g
Flaps: Yes
Retracts: No
19*24.5*106 cm


Key Features:
Add plastic hinge on the vertical and horizontal tails,increase the rudder angle.
- Big space, durable UNIBODY design
- Special airfoil design for carrying big weight
- Compatible with most kind of camera mounting
- Capability to carry Camera Gimbal
- Quick, easy to assembly, no glow required
- Light weight and durable EPO wing construction


FPV SYSTEM DEPLOYMENT
Special design and optimize for long range FPV, so there is a lot of space for mounting systems and different Camera mounting way, which not require any modify. 


EASY FOR ALL KIND OF CAMERA MOUNTING
Are you tired of modification a lot to mount your camera well? Now you don’t have to. We consider a lot kind of mounting for you, you can easy to mount it as better as you like. Stable, safe, and easy, just focus to make a wonderful video and enjoy it.


EASY FOR FPV CAMERA MOUNTING
Considering for professional FPV traveling, usually you will need a full HD camera and another FPV camera for Video transmission, so we leave a very convenient, safe, good view space for you to mount a FPV camera, just enjoy it.


SPECIAL FUSELAGE DESIGN
The whole unibody fuselage is produced  by our copyright one-step moulding technology, which make it more durable and strong than other EPO foamy insert carbon tube. So it can avoid the tail effected by the air and cause the bump during the flight.
Special small platform in the tail is builded for video TX installation, can leave away from the radio equipment avoid causing nosy. In the same time the propeller can cool down it from over heat.


GRADIENTER PREINSTALLED
We are thinking much more than others, for UAV system setup, to calibrate the sensors in horizontal level is very very importance. So the gradienter in the wing CG position will help a lot to setup the system.


VERY BIG SPACE FOR BIG BATTERIES
The very importance point for a airplane which can travel long range or not, should be the big batteries carrying ability. Thanks to our unibody technology,  we have much more a lot space than other foamy plane to carry almost twice capacity batteries. Of course we still have a lot more space for equipment, and sure we have lot more space for cooling down the battery.
As image showing the fuselage carrying 2pcs 14.8V 5000mAh Li-Po batteries.

Package Included:
1 x Volantex Ranger EX 757-3 RC Airplane PNP




Others Also Viewed these Popular Items...View All Products

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP
Description:
The Ranger EX is a airplane is specially designed for Long Range FPV and quick and very easy trouble free Setup of this great big Bird. FPV Ranger EX offers few greater qualities that every FPV pilot looks forward to have in his / her RC FPV Plane.

- It has bigger tougher PVC Fuselage that makes this plane a crash resistant plane, Tons of open space to let bigger hands do their job inside the fuselage when it comes to mount the electronics inside and also this big place makes it possible for one to mount more gear inside and keep things neat.
- Ability to carry more payload means one can mount higher mAh batteries to get ultra long flight times needed for those long range FPV flights you are going to do
- Tall Landing gear and dragger wheel means you can now safely take off and land from ground. No need to hand launch a big heavy plane with all the gears and dangerous and sharp propeller spinning at the back
- Easy mounting of Various Brushless gimbals for GoPro 3 under the nose, now you can take ultimate stable flight videos of your long range flights
- Super easy few step setup and glue free assemble.
- Two pieces to carry only, Fuselage and Wings detach quick and easy for easy transportation and storage. Quick attachment on field for flight
- And not to forget the super awesome and powerful flight performance with long flight endurance this plane offers.


Specification:
Minimum Age Recommendation: 14 years
Experience Level: Beginners ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
Motor: 3715 powerful out runner brushless motor
ESC:Easy-Plug 40A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Propeller: 1060 Propeller
2.4Ghz 6-Channels(Not Included)
Receiver Not Included
11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Not Included)
Wingspan: 1980mm (77.9 in)
Overall Length: 1170mm (46 in)
Flying Weight(without battery): 1500g
Flaps: Yes
Retracts: No
19*24.5*106 cm


Key Features:
Add plastic hinge on the vertical and horizontal tails,increase the rudder angle.
- Big space, durable UNIBODY design
- Special airfoil design for carrying big weight
- Compatible with most kind of camera mounting
- Capability to carry Camera Gimbal
- Quick, easy to assembly, no glow required
- Light weight and durable EPO wing construction


FPV SYSTEM DEPLOYMENT
Special design and optimize for long range FPV, so there is a lot of space for mounting systems and different Camera mounting way, which not require any modify. 


EASY FOR ALL KIND OF CAMERA MOUNTING
Are you tired of modification a lot to mount your camera well? Now you don’t have to. We consider a lot kind of mounting for you, you can easy to mount it as better as you like. Stable, safe, and easy, just focus to make a wonderful video and enjoy it.


EASY FOR FPV CAMERA MOUNTING
Considering for professional FPV traveling, usually you will need a full HD camera and another FPV camera for Video transmission, so we leave a very convenient, safe, good view space for you to mount a FPV camera, just enjoy it.


SPECIAL FUSELAGE DESIGN
The whole unibody fuselage is produced  by our copyright one-step moulding technology, which make it more durable and strong than other EPO foamy insert carbon tube. So it can avoid the tail effected by the air and cause the bump during the flight.
Special small platform in the tail is builded for video TX installation, can leave away from the radio equipment avoid causing nosy. In the same time the propeller can cool down it from over heat.


GRADIENTER PREINSTALLED
We are thinking much more than others, for UAV system setup, to calibrate the sensors in horizontal level is very very importance. So the gradienter in the wing CG position will help a lot to setup the system.


VERY BIG SPACE FOR BIG BATTERIES
The very importance point for a airplane which can travel long range or not, should be the big batteries carrying ability. Thanks to our unibody technology,  we have much more a lot space than other foamy plane to carry almost twice capacity batteries. Of course we still have a lot more space for equipment, and sure we have lot more space for cooling down the battery.
As image showing the fuselage carrying 2pcs 14.8V 5000mAh Li-Po batteries.

Package Included:
1 x Volantex Ranger EX 757-3 RC Airplane PNP

Read More


Price: $197.99

Buy Now Add to Cart

TY Model Black Flyer V1 2.4G 6CH Carbon Fiber Film RC Airplane DSM2 BNF

TY Model Black Flyer V1 2.4G 6CH Carbon Fiber Film RC Airplane DSM2 BNF
Description:
Brand Name: TY Model
Item Name: Black Flyer V1 
Total Length:340mm
Wingspan: 336mm
Color:Black
Experience Level: Beginner to advanced
Radio Control: 2.4GHz 3-channel/6-channel
Height:102mm
Battery:14x20x6mm 100mAh 1S 3.7V
Control distance:Over 100 meters
Fuel Type: Electric
Flying Weight: 13-18g
Flight time: 10 mins
Material: Carbon Fiber-abs Engineering Plastics
Battery: 50-150mA1S
Motor: 6mm Coreless DC 
CG: Behind the wing leading edge 33-35 mm
Usage Environment: Indoor or windless weather(Outdoor use suggestion: Replace 4530 propeller)
Required Transmitter: 6+ Channel DSM2,JR, DX6, Walkera Transmitter  can be compatible((Not included))

Features:
DIY parklfly plane, make and design your own plane
BNF version, everything except the transmitter is included
With detailed install manual, the flyer is easy to assemble
 
Package Included:
1x TY Model Black Flyer V1 RC Airplane BNF
Read More


Price: $49.49

Buy Now Add to Cart

X-uav Mini Talon EPO 1300mm Wingspan V-tail FPV Plane Aircraft Kit

X-uav Mini Talon EPO 1300mm Wingspan V-tail FPV Plane Aircraft Kit

The Mini Talon V-tail plane is the smaller version of the popular Talon Kit. The kit comes un-assembled with EPO and laser cut plywood parts.Runs 4S 14.8V 10,000mAh LIPO battery, flight times are long, and wing loading still low thanks to the generous wing area of the Talon. A generous fuselage compartment with large top hatch allows you to access your equipment and flight battery in any configuration you choose. It is a great plane for anything you want to throw at it.you can use these for site surveying, aerial mapping and FPV fun.

Description:
Brand:X-uav
Item:Mini Talon Kit
Wingspan: 1300mm
Length: 830mm
Flying Weight: 1000g-2000g
Note:Electronics Kit Supplied

Recommend Parts 
(Not Included):
6 CH FlySky Transmitter and Receiver Click Here
4S 5000mAh LiPoly Battery
4 x TowerPro 9g Servos  Click Here
3536(2814) 1000KV Brushless Motor
40A Brushless Speed Control Click Here
9x4.5 propeller Click Here

Recommend FPV System (Not Included):
APM Flight Controller Set 2.8 Click Here
Eachine 700TVL 1/3 Cmos 110 Degree Lens Camera Click Here
Skyzone FPV 5.8G 32CH 7 Inch Monitor DVR Click Here
Eachine TS832 FPV 5.8G 32CH 600mW Wireless AV Transmitter Click Here
Eachine FPV 5.8G 32CH Wireless AV Receiver RC832 Click Here

5.8G Gain Petals Clover Mushrooms Click Here

Features:
- The Mini Talon FPV V-tail Drone is the new little brother of the popular Talon FPV plane.
- Its smaller size is great for packing with you on your favorite FPV safari.
- Runs on 4S 14.8V 10,000mAh LiPoly battery, long flight times.
- Low wing loading.
- Generous fuselage compartment with large top hatch allows you to access your FPV equipment and flight battery in any configuration you choose. It is an open canvas for your FPV needs.
- Kit - All assembly and equipment installation required
- Moulded EPO airframe
- Laser cut plywood motor mount and wing saddle frame
- Mono-wheel landing gear protects bottom of fuselage
- Large fuselage compartment accommodates many battery and equipment configurations.
- Two Piece plug in wings with carbon wing tube

Note:
Kit only, does not include motor/ESC/Servos.
The LY-T08-11 Carbon Rod Fastener is installed on the wing,the LY-T08-12 Wire Line is not included.


Package Included:
1 x X-uav Mini Talon RC Kit

Read More


Price: $78.64

Buy Now Add to Cart

XK DETECT X380 X380-A X380-B X380-C GPS 2.4G 1080P HD RC Quadcopter RTF

XK DETECT X380 X380-A X380-B X380-C GPS 2.4G 1080P HD RC Quadcopter RTF

Description:
Name: RC Quadcopters
Material:High imitation carbon fiber,special PC + ABS
Size: 30.5*30.5*21 CM
Wheelbase:37.6 CM
Color box size:39.8*34.3*23 CM
Take off weight: X380(945) ,X380-A(1055g), X380-B(1005g), X380-C(1180g)
Packaging:Sealed case

Feature:
GPS positioning,Level error(±0.5m)
Measuring height with air pressure,Vertical error(±0.5m)
Compass,Headless mode,Super Headless mode
Automatic return,Failsafe,Around point shooting
Two low-voltage protection,Landed safely
A key take-off and A key to landing
Remote control distance 1000 meters
Charging time:1.5-2 hours
Remote control mode:2.4G
Remote distance:1000m
The number of drive motors:(2212  950/KV) *4pcs
Battery Details:11.1V  5400mAh  20C
Flight time: X380(30 minutes)
                     X380-A(27 minutes)
                     X380-B(28 minutes)
                     X380-C(22 minutes)


Specially:

X380: Standard configuration(Gimbal and camera is not included)
X380-A: Single-axis servo Gimbal,1080P HD Sports camera, continue working 80 minutes if the battery full power(Included one-axis gimbal and 1080P camera)
X380-B: Three points Damping Gimbal,1080P HD Sports camera, continue working 80 minutes if the battery full power(Included three-point damping gimbal and 1080P camera)
X380-C: Two-axis brushless Gimbal,1080P HD Sports camera(Included Two-axis gimbal and 1080P camera)

The throttle lever and direction control lever can swich.It means that the Mode 1 (Right Hand Throttle)  and Mode 2 (Left Hand Throttle) can swich each other .
The gimbal for X380 will arrive later,it is suitable for Gopro Hero 3 camera.

Package Included:
1 x X380/X380-A/X380-B/X380-C Quadcopter
1 x Remote control
1 x Instructions
1 x Charger
4 x Propeller
1 x Lithium Battery
1 x Reader
1 x Data line

Read More


Price: $512.59

Buy Now Add to Cart